bed time

Discuss KatS or not KatS interiors here
Post Reply
User avatar
schmiddi
Posts:27
Joined:Sat Feb 05, 2011 9:31 pm
bed time

Post by schmiddi » Sat Feb 26, 2011 10:10 pm

Hello,
today I practiced my thoughts about a simple place to rest.
The premise -
Using the interior without damage ( or only very little ) and fast recovery.
Simple trick -
Two small metal braces between the seat boxes.
Both back upholsteryes are now removeable and fit in between the seats.

The headrest-pad ( now also removable) fills the gap at the backward two-seat.

After three trainings-sessions, good for me as a lazy guy... :)-
... altogether making beds in less than 25 seconds.

For more luxary and the first long-therm test, I will put a soft thermo matt on it.

My first sleep result will only be posted here, if there wasn´t any collateral damage at body or baybus. ;)

watch out, rebuild at your own risk.

Juergen

Image
Image

lmpd
Super Moderator
Posts:533
Joined:Thu Sep 17, 2009 10:24 pm

Re: bed time

Post by lmpd » Sun Feb 27, 2011 1:05 am

genius, suprised nobody thought of it sooner /\:)

User avatar
Dubmatix
Site Admin
Posts:1431
Joined:Wed Dec 03, 2008 8:37 pm

Re: bed time

Post by Dubmatix » Sun Feb 27, 2011 10:25 am

Excellent! And Pete, this is what i have been thinking about doing....even looking at alternative mounts for the demountable backrests (rather that undoing the screws all the time. We need to get this sorted for our Sctoland II - The Return (and completion!) trip! :) In fact it was supposed to be sorted for the first one! Oops!

There are some slide together metal mounts available from hardware shops that i have got for experimenting with this, they are opposing metal tangs that slide into each other. Just not quite got round to. []<O
:idea: I hadn't considered using the headrest pads though. Nice one!!
Juergen, have you fitted alternative mounts for your backrests into their original position? I would be interested in seeing this and your brackets for ideas. I was thinking about making a small fold up wooden frame that sits in the middle that the two pads sit on. Or alternatively holes in which pegs/dowels could be fitted for fitting supports.

There were a couple of threads about this type of mod somewhere...I think the 'Scottish' TEL80 had some experimental wooden frame for this. I'll find the link...

Aha....Kats Bed http://kats.thebughaus.co.uk/kats/viewt ... p?f=5&t=84

User avatar
Dubmatix
Site Admin
Posts:1431
Joined:Wed Dec 03, 2008 8:37 pm

Re: bed time

Post by Dubmatix » Mon Feb 28, 2011 2:07 pm

This is another way....Grant built this folding frame...

Image

Image

But i don't think it was for using the backrests, just some additional foam.

I prefer Juergens way with additonal foam cushions to throw in for longer trips! :) Even more comfort and carrying less heavy things!


Copied here for future reference

Post Reply