Does anyone have acccess to one of these to post some close up photos of all round the cross piece and the features in the mouldings/tube? It would really come in handy for my current project which i will post some pics of soon!
Kathrein antenna
Re: Kathrein antenna
Which cross piece and mouldings/tube do you mean?
Re: Kathrein antenna
Hi Roland, it's the horizontal piece, i'd like to see some closeups of the top, both ends, the underside and a dimension in mm between the centre of the stub for the mounting adapter and the centre of the green vertical lower element of the dipole. That would be super! I see there are some screws in the lugs next to the dipole and it looks like there is one on the end of the horizontal too posibly with a screw in it. SOme closeups would really help with this!
Regards
John
Regards
John
Re: Kathrein antenna
Actually help with the approximate dimensions in mm here would be brilliant.
Re: Kathrein antenna
Sorry for the delay, it took me a certain time to get access to my KATHREIN.
The dimensions are as follows, starting at 12 clockwise:
215
60
60
80
50
4
11
Hope this helps.
Closeup photos didn't work with my cheap basic digicam
The dimensions are as follows, starting at 12 clockwise:
215
60
60
80
50
4
11
Hope this helps.
Closeup photos didn't work with my cheap basic digicam
Re: Kathrein antenna
Thanks Roland, that's perfect. I think i will be restricted by the build bed size as the overall length is longer than the build bed, though i could try it vertically or in more seperate pieces. The odd shape of the end where the cable entry is is elusive! If you do manage to get a closer up shot of that so i can better match the profile, this would be useful!
Other than that i may just scale it to fit on the build bed as it will still look the part and nobody will notice that it's 30mm shorter!!
Cheers
John
Other than that i may just scale it to fit on the build bed as it will still look the part and nobody will notice that it's 30mm shorter!!
Cheers
John